It is important that you know the details of your home like the back of your hand in case you are a homeowner. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Below are some of the ways that you can be able to find out where the various valves are located.
If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.